User Manual
AT-108 AIS AtoN Buoy Tracker
v1.1.2.2021-108
SKYNAV Technology, Inc.
ADD 6F., No105, Xicheng Rd., Banqiao Dist., New Taipei City 220, Taiwan (R.O.C)
Tel:886-2-26870869 / Fax:886-2-26870096
www.skynav.com.tw / [email protected]
Made in Taiwan
What do I need?
The tracker, Transparent cover, Rubber, VHF antenna, Charger
VHF antenna
Rubber
Rubber
The tracker
Transparent cover
Charger
RECYCLABLE
PACKAGING
Software setting
Download and install the software on PC.
Connect the supplied USB cable to the AIS tracker and PC.
Open the software and choose the right
COM Port
and required
model of the device.
Charging
Turn OFF the tracker while charging.
Input: AC100~240V, 50/60Hz
Output: DC13.1V/1A
Charging (red) / Fully charged (green)
Take 4~5 hours for charging, return ON the tracker to make sure
the light flash 9~10 times.
Start the AIS BUOY Tracker software.
4
Password:1234, choose the correct COM Port and click the “connect”.
5
Enter the MMSI, Name (17chacators) and select Interval.
6
Enter the information of your marine equipment.
(The blue point is the position of our tracker.)
7
Click the “Set”.
8
Click the “Query” to check is the information set up correctly done.
9
If yes, Click the “Exit”.
10
Plug in the data cable.
1
Turn on the AT-108.
2
Connect to PC by USB.
3
Warning
AT-108 is a fully certified Type 1 AIS Aids to Navigation buoy tracker.
This device has some optional user activated functionality which may
not be permitted in some countries. If you are in any doubt, please
check with your local authorities.
Notifications
Do not charge it over 6 hours.
Stay away from fire.
Do not crash by Human negligence.
