8. The OSD menu – installation
GB 20
2.5 Multi-satellite search
2.5.1 Satellite
Overview of the satellites which are actually searched for
during the multi-satellite search. Information on the
settings is stated above (2.4.2-2.4.6).
2.6 TP list
For searching for an individual transponder. This search
method is advisable if you only wish to store a certain
channel or a certain channel package. The respective
reception parameters (frequencies, etc.) are stated on
the Internet or in TV and specialist magazines.
2.6.1 Satellite selection
Select a preset satellite.
To change a transponder press the [red] button, to add a
new transponder press the [green] button and to delete
the current transponder press the [yellow] button. If you
wish to search for the transponder of the currently
selected satellite, press the [blue] button.
2.6.2 Symbol rate
The symbol rates of the most common satellite
transponders have a value of 27500 or 22000. Change
the values either via direct input or in single steps via
the [
왗왘
] buttons.
2.6.3 Polarisation
Satellite signals are transmitted on two levels (horizontal
and vertical). Select the corresponding level H or V.
Note: The common number, e.g. 12480H, equals:
Frequency 12480 MHz and the H stands for horizontal.
