Before beginning the installation, read these instructions and the enclosed driver’s WARNING
NOTICE thoroughly and completely. Also affix the WARNING decal in passenger compartment in
clear view of all occupants. If any of these items are missing from this instruction packet, do not pro-
ceed with installation, but call SKYJACKER® to obtain needed items. If you have any questions or
reservations about installing this lift kit, call SKYJACKER® at 318-388-0816 for Technical Assistance
or Customer Service departments.
Make sure you park the vehicle on a level concrete or asphalt surface. Many times a vehicle is
uneven (side-to-side) from the factory, but usually not noticed until a lift kit has been installed which
makes the difference more visible. Using a measuring tape, measure the front and rear (both sides)
from the ground up to the center of the fender opening above the axle. Record below for future ref-
erence.
Driver Side Front:
Passenger Side Front:
Driver Side Rear:
Passenger Side Rear:
IMPORTANT NOTES:
• 2006 Models with 2-Piece rear drive shaft, will require “angled” carrier bearing lowering
bracket Part# CBL206.
• Models Equipped with Rear Sway Bar must order Extended Rear Sway Bar End Links.
8.5” Lifts Order Part# SBE406
• Some Models may come equipped with a (larger) Sterling rear axle. These models will
require wider rear U-Bolts. Order Part# U9B12R.
•
Please refer to Parts List to insure that all parts and hardware are received prior to disassembly of
vehicle. If any parts are found to be missing, contact your dealer as soon as possible.
•
If larger tires (10% more than stock diameter) are installed, speedometer recalibration is necessary
(see Ford dealer or Tire Store).
•
This lift is determined from the front while only lifting the rear to a position level with the front.
•
After installation occurs, a qualified alignment facility is required to align vehicle to factory specs.
2005 Ford Super Duty
8.5” Installation Instructions
REQUIRED TOOL LIST:
* Assorted Drill Bits
* Brake Fluid
* Metric and Standard wrenches and sockets
* Floor Jack
* Jack Stands
* Measuring Tape
* Pitman Arm Puller
* Torque Wrench
www.skyjacker.com
I-F585 8-07
Pg 1
