Skyjack SJ-7027, Operating, Maintenance And Parts Manual

Page: 99 / 216

SECTION 6, Page 1 SJ-600 Series Engine Powered 112715
June 2001
SECTION 6
PARTS LIST
CUSTOMER___________________________________________________________________
DEALER______________________________________________________________________
MODEL NUMBER ______________________________________________________________
SERIAL NUMBER ______________________________________________________________
DATE PURCHASED ____________________________________________________________
USE ONLY SKYJACK AUTHORIZED REPLACEMENT PARTS!
which assembly or group it is used in. Individual parts
without identifying letters are used in all the assemblies
or group shown at the beginning of the parts list.
Descriptions preceded with an (•) indicates a
serviceable component or attaching hardware for the
higher level assembly.
QUANTITIES (Units per Assy.)
The quantities of each part that are required to
complete the assembly. If quantity is (AR), it is
understood that the quantity may vary when machine
is equipped with certain options. Order quantity as
needed.
HARDWARE
Standard screws, washers, nuts, etc. are not identified
by a reference number. These parts are known as
COMMON HARDWARE items and appear indented
under the major items with which they are used. They
should be ordered separately as listed, since they are
not component parts of the pieces they attach to.
HOW TO ORDER REPAIR PARTS
1. Address all orders to your local SKYJACK dealer.
2. Specify model and serial number of the work
platform (found on the serial number plate).
3. List the quantity needed.
4. List the length needed (if bulk item).
5. List the part number and description as shown in
this manual for each item.
6. Show billing and shipping address and name of
individual if possible.
7. Suggest best routing.
GENERAL
The information contained in this section is designed to
aid the user in locating and identifying replacement parts.
Component parts of various assemblies and sub-
assemblies comprising the work platform are illustrated
and accompanied by a descriptive parts list. Exploded
drawings are used to show relative location of
component parts in disassembly order. If a part cannot
be found in this section, order by work platform model
number and serial number, giving a complete description
of the part.
PARTS ORDERING INFORMATION
When ordering replacement parts, the complete part
number and description should be used to ensure
proper identification and delivery of the desired item.
This complete identification should also be used when
requesting equipment information.
METHOD OF LISTING
Parts are listed in order according to the reference
number shown in the illustration, followed by a full
description based upon the “NOUN FIRST” method. That
is, the noun name of the part is listed first, then the
modifying description information which serves to
specifically identify the item. For example: PIN, Clevis.
Assemblies or groups are shown at the beginning of a
parts list and are identified with the letter references A,
B, C, etc. Individual parts in these lists have
corresponding letters after their description to identify
6
5 4 3 2 1 toc