manualshive.com logo in svg

Skyjack SJ-7027, Operating, Maintenance And Parts Manual, Page: 193 / 216

Share
Download
Skyjack SJ-7027 Operating, Maintenance And Parts Manual Download Page 193

SECTION 6, Page 111

SJ-600 Series Engine Powered

 112715

June 2001

Index

No.

Skyjack

Part No.

Description

Units

per

Assy.

FIGURE 6-47. ENGINE AND RELATED PARTS - Kubota Dual Fuel Engine

Parts list continued from the previous page.

35

103156

•   FITTING, Connector

1

36

300798

•   FILTER, Bulkhead

1

37

103164

•   FITTING, Elbow 90°

1

38

300799

•   VALVE, Relief

1

39

102519

•   CLAMP, #6 Gear

2

40

113641

•   FITTING, Elbow 90°

1

41

103158

•   FITTING, Elbow 90°

1

42

300796

•   FITTING, Connector

1

43

300781

•   FITTING, Elbow 90°

2

44

111629

•   VAPORIZER, Regulator

1

45

102660

•   HOSE, 3/16”

AR

46

300801

•   HOSE, 3/8” 250PSI

AR

47

300797

•   HOSE, 3/8” 200PSI

AR

48

300782

•   FITTING, Elbow 90° hose barb

2

49

115294

•   FLANGE, Flywheel

1

50

115296

•   HUB, Pump

1

51

113409

•   HOUSING, Gas engine bell

1

52

355055

•   SUPPORT, Dual Fuel carrier

1

53

114328

•   FITTING, Connector #16-#20S

1

54

114325

•   FITTING, Connector

1

55

114201

•   PUMP, Dual

1

56

101297

•   BOLT, Hex-hd. 3/8-16 x 1-1/4” lg.

2

57

120054

•   FITTING, Elbow 45° #10-#8

2

58

113653

•   CLAMP, 1-1/8” Exhaust

2

59

300768

•   PIPE, Exhaust

1

60

103848

•   BOLT, Hex-hd. 10mm-1.25 x 20mm lg.

4

61

300600

•   WASHER, Lock M10

12

62

114720

•   BOLT, Hex-hd. 10mm-1.25 x 30mm lg.

8

63

102838

•   SWITCH, Oil pressure

1

64

(Ref.)

•   HARNESS ASSEMBLY, Engine

1

     

(For Components, Refer to Figure 6-44 or 6-45)

-

65

300464

•   SCREW, #10-32 x 7/8” lg.

2

66

355062

•   HOSE, 1/4” 200 PSI

AR

67

300800

•   BOLT, Hex-hd. 6mm

1

68

355035

•   BRACKET, Overflow

1

69

300780

•   TANK, Overflow

1

70

111618

•   SOLENOID, 12V LPG Shut-off

1

71

113648

•   HOSE, Propane fuel

1

72

123367

•   CARRIER ASSEMBLY, Hose (18 links)

1

122998

•   •   BRACKET, Carrier Assembly Mounting (Male)

1

122999

•   •   BRACKET, Carrier Assembly Mounting (Female)

1

122835

•   •   SEPARATOR, HOSE Carrier

AR

122836

•   •   LINK, Hose Carrier

AR

Use CARRIER ASSEMBLY #111395 (17 links) or # 113852 (18 Links)

     for Machines with Serial #33301 and below.

              • Uses SEPARATOR #114199

              • Uses LINK #113860

              • Uses Brackets #113853

73

102893

•   ZIP TIE, Large

2

Summary of Contents for SJ-7027

























































































































































































































Reviews:

No comments