April 2006
SKYJACK, Page 8
SJIII Series E - CONVENTIONALS
Section 1 - About Your Aerial Platform
1.8 Tilt Sensing System
The tilt sensing system located on the base of the aerial
platform is designed to prevent lifting or driving when
the machine is on a slope greater than a predetermined
limit. If in this situation the platform must
be fully
lowered immediately.
1.9 Serial Number Nameplate
The serial number nameplate, located at the rear of
the machine, lists the following:
•
Model number
•
Serial number
•
Machine weight
•
Maximum drivable height
•
Maximum capacities
•
Maximum number of persons permissible on the
platform
•
Voltage
•
System pressure
•
Lift pressure
•
Maximum platform height
•
Maximum wheel load
•
Maximum wind speed
•
Maximum manual force
•
Maximum incline
Use this information for proper operation and mainte-
nance and when ordering service parts.
