4.11 Msg Duration
Thi option will allow you to adjust the length of time that messages appear when navigating Apollo.
Examples of the messages are "<ESCAPE> key pressed, NO change made", and the sensor
number/information message that preceeds the "Read Sensor" screen.
The choices available are 0.5, 0.75, 1, 2, 3, 4, 5, or 7 seconds. We would recommend sticking to the
default (2 seconds) to begin with, increasing if there are any difficulties, and after the user has gotten used
to operating Apollo, and understands the menu then decreasing the message duration.
In the menu, use tuto choose appropriate duration time, then [Enter] to confirm. Amessage with the
new message duration time will show. Likewise if [Esc] is pressed at any time, a message will confirm that no
change was made.
4.12 Beeper Sounds
This menu item allows the user to change the "beeper" sound Apollo makes when its buttons are
pressed. The default sound is "Minimal". The options are "Minimal, "Full" and "No Beeps". Use tukeys to
navigate to the preferred option, then the [Enter] button to confirm choice. A message will confirm the
change.
If the [Esc] button is pressed at any time, you will exit into the main menu, and a message will confirm
that no changes was made.
4.13 Contact Skye
This option shows the contact details for Skye Instruments. Please do not hesitate to contact us, our
technical help team is always available to answer queries, and we would love to hear your opinion on
Apollo.
Use the tukeys to toggle between our email and telephone number.
+44 (0) 1597 824811
4.14 The Skye Team
This option shows you the team who were involved in the design, programming and building of Apollo:
Skye Instruments...
- An Employee-Owned Company
Apollo was Designed, Programmed and Built by the Skye Team:
Sarah1, Adam T., Barbara, Gill, Alison, Trevor, Al, Lou, Sarah3, Gareth, Christian, Bee, Matt, Jolyon,
Adam S., Emlyn, Rosie, Andrew
John & Caann
10
Apollo Display Meter
