4
1. Introduction and Setting Up
1.0 Quick Reference for This Chapter
•
How to use the control panel:
Sections 1.9
•
How to adjust the blade holder:
Section 1.7.4
•
Where to position the pinch wheels:
Section 1.8
•
The cutting mat is too sticky (or not sticky enough):
Section 1.7.5
Important Notes:
•
Please read
Section 1.2
regarding safe operation of the Skycut.
•
Report any damage or missing contents to your dealer promptly.
•
Retain the original box and packing materials in case you ever need to ship your Skycut.
1.1 Support
•
Thank you for choosing a Skycut EV24 digital die cutter. Before using a blade in your new cutter, we urge
you to practice with the test pen, making sure you understand where shapes will cut.
•
If you run into difficulties with the operation of your Skycut, turn off the power and look for a solution in this
manual. Note that
Appendix A
is a
Troubleshooting
section. If you continue to have technical questions or
issues, please contact your dealer as soon as possible.
•
If anything is missing from your order or you have mechanical issues with your Skycut, please contact your
dealer as soon as possible. You can also contact Skycut directly using this email address:
.
•
For additional information and support with the Skycut, please check out the following:
https://www.facebook.com/skycutcuttingplotter/
https://www.facebook.com/groups/Skycut
https://www.youtube.com/channel/UCrPn5hFLbiRNDgccY8iXwoA/videos
•
For SignMaster support, please go to
http://signmaster.software/support/
1.2 Safety and Warnings
Please be aware of the following safety guidelines when working with the Skycut:
•
Pinch Points:
Keep hands, long hair, loose clothing, jewelry, etc. away from the moving parts.
•
Risk to Children and Pets:
Please supervise children around the cutter when it is in use.
•
Movement and Touching:
Do not move the Skycut itself or touch any circuitry while it is plugged in.
•
DO NOT attempt to move the blade carriage while the cutter is powered on.
•
DO NOT touch or jam the plotter’s track while it is operating.
•
DO NOT shake the cutter while it is operating.
•
DO NOT cut any materials that have staples or other embellishments attached.
