SETUP
57
Setup
Audio and Language Settings
The standard (default) setting for each item is marked with *.
To confirm any changes, highlight ‘Save New Settings’ then press
select
, or to cancel, press
back
( ).
If you press the
red
(Reset all settings) button, the settings will change
to the
standard
settings (
NOT
the settings made by your installer).
Item
Settings
Comments
Audio output
Stereo *, Mono
Controls the audio output on the SCART
lead.
Background music
On *, Off
Controls whether or not music will play
while you look at your SKY Digital Guide.
Incorrect PIN signal
On *, Off
Controls whether or not a ‘beep’ noise will
sound if you enter an incorrect PIN.
S/PDIF Output
Dolby *, MPEG
Controls the digital audio output from the
connectors marked ‘OPTICAL AUDIO
OUT’ and ‘DIGITAL AUDIO OUT’. Select
Dolby if your equipment has Dolby Digital
decoding capabilities. The setting ‘MPEG’ is
for digital stereo sound. Note: Dolby Digital
is only available on some programmes. If
Dolby Digital is not available, the audio
output will be digital stereo.
Preferred Language
–
Choose your preferred language for
programmes or channels where more than
one language is available
S
k
yN
ZP
V
R user.book Page 57 Thursda
y
,
N
o
v
ember 3,
2
005
2
:58 PM