4O3A Signature – Antenna Genius User Manual
Page
35
of
55
Fill in your antenna info giving each antenna a unique name up to ten alphanumeric characters
long including spaces. For each antenna, select the applicable band or bands that are usable
with that particular antenna.
You can have multiple antenna options for a particular band; for
example, in the set-up above “Multi V” is a wideband vertical usable
on 20 through 10 meters and can therefore be selected by clicking on
the A or B buttons if not first automatically selected by AG.
When there is more than one antenna available for a particular band,
AG will return to the last antenna used for that band when that band
is selected.
The ‘None’ option in the Band selector allows selection of an antenna for use outside of the
ham bands, for example, a long wire to be used to listen to WWV or shortwave broadcast
stations.
After you’re done programming your antenna and band connections, select Save and Reset, AG
App will write your antenna-band logic to your AG. The Reset device button re-sends the
current antenna-band data to AG.
10.
OPERATION
AG can operate both locally and remote.
Locally, it is the part of your own LAN and the most common
Remotely, AG is part of another network. It is up to you to choose how to access to that other
network. The common way is to use VPN. Remote AG does not require remote PC.
10.1.
Local (LAN) operation
After programming your AG antenna-to-band associations, you are
ready to go! If the FlexRadio is not running your Control window will
look like this with no antennas selected for either port: