SKS-Kinkel Elektronik GmbH
EN
300101 Table installation kit
Support-Hotline: +49 (0) 2661 98088 112
- 22 -
Version: 1.1
E-Mail: [email protected]
Document art. no. 97011101
Remount the indoor station in the upper part of the supporting frame.
Subsequently press the indoor station onto the frame until it clicks into
place.
3.2.3
Disassembly
Use a screwdriver to release the indoor station from its supporting
frame. This is done by inserting the screwdriver into the release
opening at the bottom of the indoor station.
Carefully remove the indoor station from the support frame as shown
in the drawing.
Pull the lower part of the indoor station towards you and carefully lift it
upwards.
