SKS-Kinkel Elektronik GmbH
EN
300101 Table installation kit
Support-Hotline: +49 (0) 2661 98088 112
- 15 -
Version: 1.1
E-Mail: [email protected]
Document art. no. 97011101
3
Mounting instructions
Each table installation kit is supplied with a Cat connection socket and a Cat connection cable. To avoid errors when
connecting cables please use the planning guide or the wiring diagram. (Point 5). The connection between the Cat
connection socket and the table installation kit is made by the supplied Cat connection cable.
3.1
DS2010 Video reciever
3.1.1
Preparation
Remove the table installation kit from the packaging and set it up. The
table installation kit delivered completely prepared and does not have
to be assembled.
The connection adapter is located on the back of the table installation
kit.
Plug the adapter cable through the provided opening hole in the table
installation kit as shown in the drawing.
