Skov DOL 539, Circuit Diagrams And Cable Plans

Page: 19 / 76

DOL 534 • DOL 539
Circuit Diagrams and Cable Plans 19
3.6 Printing the Installation Setup via the PC simulator
The software for the house controller is also available as a simulator variant for installation on a PC.
Once the installation menu has been set up using the PC simulator and the user has been into Show connec-
tion , the setup can be saved as a file separated by a semicolon on the PC. The file thus contains a list of the in-
stalled components and the connection terminals to which they are to be connected in the house controller.
The file can be opened using MS Excel or a text editor
and be printed in the usual way.
Open the PC simulator and select the File/System set-
tings menu.
Choose a location for the setup file to be saved.
Path to USB drive: Corresponds to the house com-
puter's filing of e.g. log files and setup files on a USB
flash drive.
Can be set in the PC simulator to save on a USB flash
drive or locally on the PC.
Folder: You can also choose to save the file in a folder.
Save the file using the name: ConnectionList.csv .
Each time the user goes into the Technical | In-
stallation | Show connection
menu, the PC simulator
saves a version of the current setup of the file.
If the file already exists, it will be overwritten.
There may only be one ConnectionList on the same
USB stick.