DOL 434 LPV
Technical Manual
43
3. Insert the USB stick containing the software update in the USB port (
C
) on the CPU module.
In the menu
Technical | Service | Install software
Select the required software version.
The installation process begins.
Settings are automatically saved before the update starts and
are loaded after the restart.
During the software update, the house controller will restart.
It is VERY important not to disconnect the power supply during update.
Do not remove the USB stick until the installation is fully completed. In other words, when the graphical user in-
terface is accessible and usable.
The software update is now complete.
If necessary, check the software version number via the menu
General | About | Software.
6.4.3 Check after software update
It is very important to check that the controller works as it did before the update, as a few connec-
tions may switch in connection with an update. The controller will provide a warning of this, but will
not indicate which connection has been moved.
If there are animals in the livestock house, it is very important to check the noted values after the
update, so that the day number and all other settings are correct again.
