24
Technical manual
DOL 278AT
11
Mounting Guide
1)
Prick/drill holes in the bottom of the cabinet (
A
).
2)
Position DOL 278AT:
•
close enough to the climate computer for the rubber sleeve supplied (
B
) to fit neatly
between them that the climate computer display (
C
) is visible, at the same time as setting
the temperature button/buttons of DOL 278AT.
(DOL 278AT can be placed on either side of the climate computer).
•
so that there is enough space, particularly above DOL 278AT, for service setting (
E
) of
the lid.
3)
Knock out large knock-out pieces (
F
) from the climate computer and DOL 278AT and mount
the rubber sleeve in one of the holes.
4)
Tighten DOL 278AT using Ø5 screws and, if necessary, Ø8 wall plugs (
E
), so that the rubber
sleeve is squeezed approx. 10 mm.
5)
Mount the rubber sleeve (
B
) so that it is waterproof.
6)
Run the cables through the rubber sleeve.
Figure 1: Mounting of the DOL 278AT
If space is inadequate right next to the climate computer, the rubber sleeve can be left out, and the
cables can be extended and routed through M25 screwed cable connections (
H
).
However, it
must
be possible to see the climate computer display while setting the DOL 278AT
temperature button(s) (
D
).
( D )
( C )
( E )
( A )
( G )
( F )
( H )
( B )
Summary of Contents for DOL 278A
