Skov 130491, Technical User Manual

Page: 10 / 28

Surveillance Cameras
10 Technical User Guide
4.1.5 Connecting the LAN cable
If the RJ 45 plug to be connected to the surveillance
camera is with strain relief, it must be cut off to fit into
the waterproof end cap.
Mount a short RJ 45 plug on the LAN cable with a
crimp plier.
Mount nut, waterproof rubber gasket, and waterproof
end cap on the LAN cable.
Attach the O-ring gasket to the surveillance camera
plug.
Attach the waterproof end cap to the surveillance cam-
era plug.
Turn end cap to lock.
Mount the nut on the end cap.
Ready-mounted in waterproof housing.
Unused plugs and cable ends must be sealed with
the supplied self-amalgamating/waterproof black tape.
Pull the green terminal blocks out of the plugs.