30
Replacement Procedures
Service Manual
SERENE SC112N-A
5. Free all pipes and cables
from the putty on the
evaporator tray edge,
detach the drain pipe from
the bottom of the
evaporator tray, and
carefully pivot the
evaporator tray out from
under the evaporator coil.
Place the tray aside.
Components on level two can now be accessed.
6. Remove the two
horizontal struts from the
sides of the refrigeration
system by undoing the
two fixing screws from
each strut.
7. Detach the mains flexible
cord from the base of the
assembly by undoing the
mains flexible cord
bracket fixing screw.
8. Detach the electrics tray
from the assembly by
undoing the eight fixing
screws (two on each
edge).
9. Tilt electrics tray up and
support with a block.
Components on level one can now be accessed.
