WARNING
The window must be inserted within 10 minutes as otherwise
the adhesion of the window adhesive may be poor.
Do not apply the adhesive bead too thick and do not press the
windows too hard on the body flange. Oozed adhesive can be
seen in the area of the joints because the windows do no longer
have any sealing lips.
♦ Insert the window into the body flange, for example using the
suction cup - V.A.G 1344- , take the mean and press in up to
the spacer web.
♦ Re-stick any existing stickers (for example for airbag).
1.15
Minimum hardening time
WARNING
Comply with special requirements when replacing glued win‐
dows. Among these are for example, that a newly glued wind‐
screen must fulfil the operational safety in the event of an
accident after a prescribed minimum hardening time.
For the 2K adhesive the minimum cure time for all slices is 3 hours
(or as recommended by the manufacturer on package leaflet).
With the minimum hardening time is meant the time from the mo‐
ment the window is glued until the vehicle is used. During this
time, the vehicle must stand on a flat surface at room temperature
(at least 15 °C).
WARNING
The vehicle is only safe for driving after the minimum hardening
time has expired.
1.16
Window repairs
Note
♦
In case of damage to the windscreen, it must be clarified
whether the glass can be repaired before replacing the wind‐
screen.
♦
Damaged windscreens can be repaired using the window re‐
pair set - VAS 6092- .
♦
The damage must not exceed a certain size and location.
♦
An instruction manual is enclosed with each pane repair kit.
Special tools and workshop equipment required
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
156
Rep. gr.64 - Glazing
