Centering the clutch disc and removing and installing the pressure
plate for vehicles with 1.2 ltr and 1.4 ltr engines
– Release and tighten screws gradually and crosswise.
– When removing inverse the position of the pressure pad -
MP1-223 (3067)- .
Note
♦
The thrust surface of the pressure plate and the clutch disc
lining must fully rest against the flywheel.
♦
Tighten the screws crosswise and uniformly so as not to dam‐
age the centering holes on the pressure plate and the center‐
ing pins of the flywheel.
Centering the clutch disc and removing and installing the pressure
plate for vehicles with 1.4 ltr (TDI) and 1.6 ltr. engines
– Release and tighten screws gradually and crosswise.
– When removing inverse the position of the pressure pad -
MP1-223 (3067)- .
Note
♦
The thrust surface of the pressure plate and the clutch disc
lining must fully rest against the flywheel.
♦
Tighten the fixing screws crosswise and uniformly so as not to
damage the centering holes on the pressure plate and the
centering pins of the flywheel.
Check the extremities of the membrane spring
• Wear is allowed up to half the membrane spring thickness.
3.1
Fault finding power transmission - prob‐
lems with the clutch and clutch control
Note
Check hydraulic clutch control
.
Before each clutch repair, examine and reconstruct the complaint
of the customer. In each individual case, it must be determined if
indeed there are problems with the clutch or the incorrect setting
of the gearshift is cause for complaint.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
70
