-7-
• Connect this saw to a 120V, 15-amp branch circuit
with a 15-amp fuse or circuit breaker. Using the
wrong size fuse can damage the motor.
• Fuses may “blow” or circuit breakers may trip fre-
quently if motor is overloaded. Overloading can
occur if you feed the blade into the workpiece too
rapidly or start and stop too often in a short time.
• Most motor troubles may be traced to loose or in-
correct connections, overload, low voltage (such
as small size wire in the supply circuit or too overly
long supply circuit wire). Always check the con-
nections, the load and the supply circuit whenever
motor does not work well.
Electrical Requirements
Recommended cutting capacity
Use of this tool beyond rec-
ommended capacities may
lead to motor burn-out and possible electric
shock.
Applicable Blade
Dimensions
12” (305mm)
Workpiece
Cross-Section
b
a
a
a
b
b
63⁄16"
a
Maximum cutting
capacity (a)
4.5”
4”
3-1/8”
Maximum wall
thickness (b)
1/4”
1609B00427 eng.qxp_SPT62MTC 5/12/15 1:53 PM Page 7
