Ski-Doo 2005 Rt series, Operator'S Manual

Page: 149 / 183

1
2
A05F0EB
TYPICAL
1. Retighten (so equipped models)
2. Retighten to 48 N•m (35 lbf•ft)
Restart engine and rotate track slowly to recheck alignment.
Reposition snowmobile on ground.
Install rear wheel caps if so equipped.
Steering and Front Suspension
Visually inspect steering and front suspension for tightness of com-
ponents (steering arms, control arms and links, tie rods, ball joints,
ski bolts, ski legs, etc.). If necessary, contact an authorized SKI-DOO
dealer.
Wear and Condition of Skis and Runners
Check the condition of the skis, ski runners and ski runner carbides
(if so equipped). If worn, contact an authorized SKI-DOO dealer.

WARNING
Excessively worn skis and/or ski runners will adversely affect
snowmobile control.
Exhaust System
The tail pipe of the muffler should be centered with the exit hole
in the bottom pan. Exhaust system must be free of rust or leaks.
Make sure that gear clamps are properly tightened.
_________________________
147