- 16 -
951-170-218-EN
Version 06
EN
1. Safety instructions
1.18 Residual risks
Residual risk
Possible in
lifecycle
Avoidance / Remedy
Personal injury / property damage due
to falling of hoisted parts
A, B, C,
G, H, K
Unauthorized persons must be kept away. Nobody is allowed to be present below hoisted parts.
Lift parts using suitable and tested lifting gear. Ensure adequate fastening/securing of the unit
(loading capacity).
Personal injury/property damage due
to tilting or falling product due to non-
compliance with specified torques
B, C, G
Adhere to the specified torques. Secure the product only to components with a sufficient load-
carrying capacity. If no torques are specified, use those specified for the screw size for screws of
strength class 8.8.
Tearing/damage to lines when
installed on moving machine
components
B
If possible, do not install on moving parts; if this cannot be avoided, use flexible hose lines
of sufficient length.
Lubricating oil spraying out due
to faulty component fitting/line
connection.
B, C, D,
E, F, G
Tighten all components with the appropriate torques. Use hydraulic screw unions and
lines suitable for the indicated pressures. These must be checked for proper connection
and for damage prior to commissioning
Lubricant blockage on tool
G
Inspect lubricant bores on the tool and replace the tool if necessary.
Environmental contamination by
lubricants and wetted parts
K
Dispose of contaminated parts according to the applicable legal/company rules.
Lifecycles: A = Transport, B = Assembly, C = Initial commissioning, D = Operation, E = Cleaning, F = Maintenance, G = Malfunction, repair,
H = Shutdown, K = Disposal
