SKF ST-1240-GRAPH, Manual

Page: 10 / 43

10
General electrical safety instructions
"
Electrical devices must be kept in proper condition. This must be ensured by periodic inspections in accordance with the
relevant applicable standards and technical rules. The type, frequency, and scope of the inspections must be determined in
accordance with the risk assessment to be carried out by the operator. Work on electrical components may only be performed
by qualified electricians. Connect the electrical power only in accordance with the valid terminal diagram and in observance of
the relevant regulations and the local electrical supply conditions.
"
Work on electrical components may be performed only in a voltage-free state and using tools suitable for electrical work. Do
not touch cables or electrical components with wet or moist hands.
"
Fuses must not be bridged. Always replace defective fuses with fuses of the same type.
"
The proper connection of the protective conductor must be ensured for products of protection class I. The specified enclosure
class must also be taken into account.
"
The operator must implement appropriate measures to protect vulnerable electrical devices from the effects of lightning during
use. The electrical device is not furnished with a grounding system for the dissipation of the electric charge and does not have
the voltage strength necessary to withstand the effects of lightning.
General behaviour when handling the product
"
Familiarise yourself with the functions and operation of the product. The specified assembly and operating steps and their
sequences must be observed.
"
Keep unauthorised persons away.
"
Always wear personal protective equipment.
"
Precautionary operational measures and instructions for the work must be observed.
"
In addition to these Instructions, general laws and regulations for accident prevention and environmental protection must be
observed.
"
Precautionary operational measures and instructions for the work must be observed. Uncertainty seriously endangers safety.
"
Safety-related protective and safety equipment must not be removed or modified and its function must not be altered and its
condition and operation must be checked at regular intervals.
"
If protective and safety equipment has to be dismantled, it must be reassembled immediately after finishing the work, and then
checked for correct function.
"
Remedy any faults that are within the scope of your responsibilities. Immediately inform your superior in the case of faults
beyond your competence.
"
Never use parts of the centralised lubrication system or of the machine as standing or climbing aids.
Intended use
SKF control centre is used for controlling various lubrication systems in accordance with the specifications, technical data and
limits stated in these instructions.
Usage is allowed exclusively for professional users in the frame of commercial and economic activities.
Persons authorised to use the product
Operator
A person who is qualified by training, knowledge and experience to carry out the functions and activities related to normal
operation. This includes avoiding possible hazards that may arise during operation.
Mechanical specialist
Person with appropriate professional education, knowledge and experience to detect and avoid the hazards that may arise
during transport, installation, start-up, operation, maintenance, repair and disassembly.
Electrician
Person with appropriate professional education, knowledge and experience to detect and avoid the hazards that may arise from
electricity.
1.5.1 Orientation for external technicians
Prior to commencing any activities, external technicians must be informed by the end user at the place of operation. on site
safety provisions, applicable accident prevention procedures and the functions, guards and protective devices of the device to
be connected to the lubrication system.