Protection
Protection Module Configuration with IMx-M Manager
SKF Multilog On-Line System IMx-M
2 - 121
User Manual
Sensor
The following sensor configuration applies to the Complementary Differential Expansion
combined measurement type only.
Figure 2 - 90.
Combined Measurement Sensor Settings (CDE only).
Master Channel:
The sensor connected to this master channel is the master probe
and decides when to switch over to the other sensor depending on the crossover
voltage.
Crossover:
It is the voltage that controls when to switch between the 2 sensors.
For detailed information, refer to
Configuration Example of a Complementary