Unit Configuration
IMx-S Time
3 - 10
SKF Multilog On
-Line System IMx-S
User Manual
Figure 3 - 8.
Null Modem Cable
W
iring.
IMx-S Time
IMx-S has a backup power capacitor which will keep the time for at least a month if
IMx-S is disconnected from a power inlet.
To correct or set IMx-S time, use one of the following methods.
•
Automatic time synchronization
This method is preferable since IMx-S will continuously synchronize the time
with the computer that has @ptitude Observer Monitor or Analyst IMx Service
running.
IMx-S uses a built-
in function (NTP) in Wi
ndows for time synchronization.
In order to activate time synchronization, refer to Time Synchronization
chapter in "@ptitude Observer Installation Manual".
•
Manual set time
Use "Set time" function in @ptitude Observer or @ptitude Analyst application.
In @p
titude Observer, the function is found under a tab menu called "On
-
line",
then "MasCon/IMx units" interface.
In @ptitude Analyst, the function is found
at Transfer / Online / Status.
