Form 37714 Rev 2002
Page 1 of 13
AirChek
®
52 Sample Pump
Cat. No. 224-52
Operating Instructions
863 Valley View Road, Eighty Four, PA 15330 USA • Tel: 724-941-9701 • www.skcinc.com
Top view
Protective control
cover (raised)
Pump inlet
(inlet filter underneath)
LCD
Flow
adjustment
screw
On/off button
Accessory
mounting screws
Battery pack
Front view
Back view
Belt clip
Charging jack
Figure 1.
AirChek 52 Sample Pump
Introduction
Description
The AirChek 52 Sample Pump
(Figure 1)
is designed for rugged industrial use at flows from 5 to 3000 ml/min. Ideal for on-worker
applications, use the AirChek 52 for short-term or full-shift sampling with sorbent tubes, impingers, cyclones, PPIs, or filter cassettes.
Checking Pump/Kit Contents
Use the table below to verify that you received all items associated with the Cat. No. ordered. If you are missing items, contact
SKC at 800-752-8472 (U.S. only) or 724-941-9701.
If You Ordered Cat. No.
Your Package Should Contain
224-52
AirChek 52 Sample Pump with NiMH battery pack and screwdriver set
224-52-S
AirChek 52 Sample Pump with NiMH battery pack and screwdriver set, single PowerFlex charger with cable,
Tygon tubing (3 feet, 1/4-inch ID), and collar clip with cable tie
224-52K
AirChek 52 Sample Pump with NiMH battery pack and screwdriver set, single PowerFlex charger with cable,
filter cassette holder, Tygon tubing (3 feet, 1/4-inch ID), and soft-sided nylon carry case
Required Equipment
1/4-inch ID tubing
PowerFlex
®
Charger
Low flow accessories
if sampling at 5 to 500 ml/min.
See Accessories.
