The Sizzix
®
BIGkick™ Machine is exactly
what crafters have been looking for – a
versatile, easy to use and affordable
multipurpose creative system. It is
designed to cut and emboss for creating
unlimited fun projects. Using the Sizzix
Originals™, Bigz™, Sizzlits
®
, Clearlits™
and Embosslits™ Dies, as well as Simple
Impressions
®
Embossing Folders,
Textured Impressions™ Embossing
Folders and Texturz™ Texture Plates,
crafters can now express their creativity
in minutes. Start unleashing the
limitless possibilities of your BIGkick to
create a combination of dazzling designs.
Before attaching handle, remove protective cap on crank shaft and
discard. Then attach handle by sliding washer over hex screw and
inserting through handle and into crank shaft. Tighten hex screw
with hex wrench provided with handle kit. Press end plug over hex
screw until firmly sealed.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING
– When using this product, basic
precautions should always be followed, including the following:
a) Read all the instructions before using the appliance.
b) To reduce the risk of injury, close supervision is necessary
when this machine is used near children.
c) Do not contact moving parts.
d) Only use attachments recommended or sold by the
manufacturer.
e) Do not use outdoors.
f) Always place and operate this machine on a clean, flat
surface.
g)
PINCH HAZARD. AVOID ROLLERS.
h)
DO NOT OVERLOAD THE MACHINE.
i)
CUTTING HAZARD. AVOID CONTACT WITH THE DIE
BLADE.
j)
ADULT SUPERVISION OF CHILDREN RECOMMENDED.
®
Assembly Instructions
Hex Screw
Crank Shaft
Washer
End Plug
Handle
Protective Cap
Using a Simple Impressions Embossing Folder,
Textured Impressions Embossing Folder
or Embosslits Die
With Simple Impressions Embossing Folder, Textured
Impressions Embossing Folder or Embosslits Die open, insert
paper, foil or other embossable material, then close like a book.
Place Sizzlits Die onto a Cutting Pad with foam side up. Place
paper over the die. Place another Cutting Pad over the paper to
create a “sandwich.” For Clearlits Die, place die over photo or
material so that the area to be cut shows through the die.
Then place photo or material and die between Cutting Pads to
make sandwich.
Place sandwich on Multipurpose Platform and slide Platform
into opening of BIGkick. Note the rotation of the handle and
continue to rotate it in the same direction until the Platform
has passed through the opening and the rollers. Remove
Platform from BIGkick. Your die-cut shape is ready to use!
Place Cutting Pad above and below the closed Folder to
create a “sandwich.”
Using a Sizzlits or Clearlits Die
Cutting
Pads
Paper
Die
Multipurpose Platform
(Tab 1)
“Sandwich”
Multipurpose Platform
Simple
Impressions
Embossing
Folder
2 1/2
"
Paper
Cutting
Pads
Multipurpose Platform
4" Embossing
Folder
(Use Multipurpose Platform Tab 1 with Embosslits Dies
and Embossing Folders 4" and wider.)
Multipurpose Platform
(Use no Multipurpose Platform Tabs with 2 1/2" Folders.)
Simple
Impressions
Embossing
Folder
