SIYI MK15E User Manual Download

Page: 80 / 95

MK15E User Manual V1.1

SIYI HDMI Converter A’s RTSP Address: rtsp://192.168.144.30:554/live/0

SIYI HDMI Converter B’s RTSP Address: rtsp://192.168.144.31:554/live/0

Common Video Player: SIYI FPV, QGroundControl, EasyPlayer

Video Display URL: Please refer to the address given in camera settings. Cameras from

different manufacturers come with different URL.

Network Diagnosis Tool: Ping Tools

6.6 Solutions to No Image

If MK15E transmitter failed to display image, please try to follow the steps below to

investigate possible reasons.

Confirm if MK15E transmitter is bound with MK15E Air Unit and confirm if the

camera is connected to the Air Unit

⚫

Transmitter and Air Unit status indicator is red.

⚫

Air Unit image transmission indicator is orange.

Open “SIYI FPV” app and check if the IP address of the camera or the HDMI

converter is input correctly. SIYI IP camera and HDMI converter have been

labeled with their IP addresses before delivery. For third-party IP cameras,

please refer to the camera settings.

In the main menu of MK15E transmitter Android system, check if the Ethernet

icon exists. If not, please enable Ethernet function.

Summary of Contents for MK15E




















































































Search results

Summary of Contents for MK15E

Reviews:

Related manuals for MK15E

Brands by name

Popular brands

SIYI MK15E, User Manual

Search results

Summary of Contents for MK15E

Reviews:

Related manuals for MK15E

Brands by name

Popular brands