SIYI MK15E User Manual Download

Page: 78 / 95

MK15E User Manual V1.1

the FPV Hub. Then open SIYI FPV app, input the IP addresses in the bar and you

will see two video streams.

6.4.3 SIYI HDMI Converter and SIYI IP Camera

The HDMI converter coming with MK15E Enterprise HDMI Combo or sold alone is

default to be HDMI Converter A, of which the IP address is “192.168.144.30”. This

IP has no conflict to either Camera A or Camera B. So, after connecting both the

HDMI converter and the IP camera to the FPV Hub and open SIYI FPV app, you

can see dual video stream when the correct RTSP addresses are input in the IP

address bars.

6.4.4 SIYI HDMI Converter and Third-Party IP Camera

Make sure that the IP camera use a different IP address from the HDMI converter

and connect them to the FPV Hub. Then open SIYI FPV app, input the IP addresses

in the bar and you will see two video streams.

6.4.5 Dual SIYI HDMI Converter

The HDMI converter coming with MK15E Enterprise HDMI Combo or sold alone is

default to be HDMI Converter A, of which the IP address is “192.168.144.30”. When

you purchase another HDMI converter for dual video stream, please make sure that

Summary of Contents for MK15E




















































































Search results

Summary of Contents for MK15E

Reviews:

Related manuals for MK15E

Brands by name

Popular brands

SIYI MK15E, User Manual

Search results

Summary of Contents for MK15E

Reviews:

Related manuals for MK15E

Brands by name

Popular brands