2.4G Datalink User Manual v1.1
17
2020 SIYI Technology Copyright
5 TELEMETRY OUTPUT (TO GCS)
The ground unit of 2.4G Datalink system can connect to the ground control software
running on different devices.
5.1 Connect to Smartphones/Tablets
By connecting to smartphones and tablets, 2.4G Datalink system can work with
Android ground control software such as QGroundControl.
Steps
1. Check baud rate settings of the flight controller in the ground control software.
2. Upgrade the correct firmware to the ground unit and the air unit according to the
given baud rate.
3. Connect the air unit with the flight controller following the right cable sequence.
4. Use the OTG cable to connect the ground unit with your smartphone/tablet.
5. Open your GCS, tap on “USB Connection – Connection Succeed”. (Please
approve if it reminds you acquire USB permission.)
5.2 Connect to PC
By connecting to smartphones and tablets, 2.4G Datalink system can work with
Android ground control software such as Mission Planner.
Steps
1. Check baud rate settings of the flight controller in the ground control software.
