Use and Maintenance Manual
–
002.108A of _27/09/2021
Square Baler
–
M 60 Mini/S
–
M 60 Mini
–
M 60 Super
13
ENGLIS
H
3.3 Meaning of the pictographs
1)
WARNING!
Do not leave the machine unattended when there are parts in motion.
Do not do any maintenance work, lubrication, adjustment, cleaning, or any other operation when there
are parts in motion.
All operations must be done when the machine is stationary and with the tractor engine turned off.
Do not use the machine without its protective guards.
Whenever the operator needs to get down from the tractor, he/she must disengage the PTO, turn off the
engine, apply the parking brake and wait for all the parts and equipment to be fully stopped before
getting off. Getting back into the driver’s seat, the operator mus
t make sure that dirt or mud does not
make it difficult to use the controls.
The machine can be used only if towed by a suitable tractor and controlled by a suitable PTO shaft,
which is driven by the tractor PTO. Any other way of using the machine is strictly prohibited.
No persons other than the operator are allowed on the tractor.
No persons or objects may be carried on the equipment.
During normal operation keep people outside the
machine’s operating
range.
When working on slopes, follow the tractor manu
facturer’s
instructions to avoid rollovers. Reduce your
speed and use caution when turning, maneuvering, etc..
Before unhooking the equipment from the tractor, rest it on the ground and stabilize it with the stabilizer.
After unhooking, check the stability of the equipment.
Do not push the product into the pickup using your hands or feet.
When transporting the machine, you must use the customary signals.
The firm declines all liability if the aforesaid rules and instructions are not followed.
