Hardware and Parts
Item No: MSUM-A-R
Summit Adirondack Rocker
Assembly Instructions
Assembly Instructions
1 - Attach part (F),
Left Arm Assembly
, to part (G), Seat
Assembly. Align and insert a bolt (A) into all 4 holes,
insert washers (C)(C1) and hex nuts (D) from the other
side, see detail 1, only hand tighten for now. We'll use
the adjustable wrench and hex key to tighten
everything once the Back is on.
2 - Repeat step 1 on the other side attaching part (E), Right
Arm Assembly, to part (G), Seat Assembly. Again, align
and insert a bolt (A) into all 4 holes, insert washers
(C)(C1) and hex nuts (D) from the other side and hand
tighten.
Figure 1
Figure 2
G
( Seat Assembly )
( Left Arm Assembly )
F
A
C
C1
D
( Right Arm Assembly )
E
G
( Seat Assembly )
2.75
A
B
C
(8)
(6)
1.50
D
(8)
(8)
(8)
C1
G
(Seat Assembly)
( Right Arm Assembly )
E
( Left Arm
Assembly )
F
( Seat Back )
H
Do not use
any hand drill
on this product
ALLEN WRENCH
( included )
You will also need a phillips-head screwdriver
( not included )
WRENCH
( not included )
2.0
B1
(3)
