Sirona SIM MODULAR Operating Instructions Manual Download Page 47

Page: 47 / 218

65 64 020 D3650

D3650

201.01.02

02 04.2016

Sirona Dental Systems GmbH

4 Operation

Operating Instructions Simulation Unit SIM MODULAR

4.2 Concept of the user interface

båÖäáëÜ

Settings screens

In many cases, functions not only can be switched on or off, but also can

be set. If a function key is pressed and held (> 2 s), the corresponding

settings screen appears. This screen is superimposed on the current

screen. The dialog in the background has a semitransparent appearance

and is temporarily disabled for inputs.

Settings screens are usually automatically hidden after a certain period

has elapsed. The

Return

key (return arrow) closes the opened settings

screen immediately.

4.2.2.3

Status column

There is a column for status displays at the left edge of the touchscreen.

Here the current time with the seconds below is shown and if several user

profiles A are preselected, the active user profile A to D is also displayed.
In addition, the days until the next sanitation and maintenance or status

messages such as add disinfectant, refill the cleaning agent for chemical

cleaning of suction hoses, or error messages are displayed.

10:45:03

San

Amalg

Desinf

41d

chem

Summary of Contents for SIM MODULAR



























































































































































































































Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands

Sirona SIM MODULAR, Operating Instructions Manual

Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands