Sirona SIM MODULAR Operating Instructions Manual Download Page 161

Page: 161 / 218

65 64 020 D3650

D3650

201.01.02

02 04.2016

161

Sirona Dental Systems GmbH

5 Care, cleaning and maintenance by the user

Operating Instructions Simulation Unit SIM MODULAR

5.3 Instruments and instrument hoses

båÖäáëÜ

5.3.3.1

Autopurge function on the EasyPad

Setting the autopurge time

The purge time for automatic purging may be set between 60 and 180

seconds in the simulation unit setup, see "Setting the purging time for the

autopurge function".

Switching the autopurge function on

✔

All instruments are in their holders.

1. Press the

Torque control/purge

key.



The

Purge

operating context is shown on the EasyPad display.

2. Press favorite key 3.



The

AutoPurge

operating context is shown.

3. Press the favorite key

2 / Setup

Inserting water-bearing instruments into the cleaning adapters

The supply module can have integrated cleaning adapters for water-

carrying instruments. These enable all instruments to be purged with

water. For this purpose, water-carrying instruments must be inserted into

adapters on the supply module.

✔

The "Start" text is shown on the EasyPad display.

1. Remove the SPRAYVIT sleeves from the valve bodies and the

straight and contra-angle handpieces from the water-carrying

instruments.

Purge

Setup

Summary of Contents for SIM MODULAR



























































































































































































































Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands

Sirona SIM MODULAR, Operating Instructions Manual

Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands