Sirona SIM MODULAR Operating Instructions Manual Download Page 140

Page: 140 / 218

65 64 020 D3650

140

D3650

201.01.02

02 04.2016

4 Operation

Sirona Dental Systems GmbH

4.11 Configurating the simulation unit (setup)

Operating Instructions Simulation Unit SIM MODULAR

4.11.2

Configuring the simulation unit on EasyTouch

4.11.2.1

Opening the setup dialogs

✔

All instruments are in place. The Start Programis displayed on the

touchscreen.

✔

The required user profile is active.

1. Press the

Sub-dialog

fixed key.



The

Start

sub-dialog is displayed.

2. Hold down the

Setup

button (> 2 s).



Four setup dialogs are offered for selection.

Key symbols of the four setup dialogs line by line from left to right:

● Date and time
● Control options
● Network connection
● Service domain (for service engineers only)

The current software version of the simulation unit is displayed on the left

side of the touchscreen.
➢ Touch the corresponding key to open the Setup dialogs.

Some of the setup dialogs comprise several pages. Using the

Scroll

forward

key, you can switch to the next Setup dialog page.

Setup program, storing settings

Missing function keys

10:45:03

Setup

IMPORTANT

Setup program, storing settings
The setup program closes automatically if no key is activated in 25

seconds. All of the settings you have made will be accepted when you

leave the setup program.

IMPORTANT

Missing function keys
Function keys for functions which the treatment center equipment does

not include are not displayed on the touchscreen.

Summary of Contents for SIM MODULAR



























































































































































































































Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands

Sirona SIM MODULAR, Operating Instructions Manual

Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands