Sirona orthophos xg 3, Installation Instructions Manual

Page: 104 / 142

11 Appendix Sirona Dental Systems GmbH
11.1 Service routines (for installation) Installation Instructions ORTHOPHOS XG 3
60 51 416 D 3352
104
D 3352.031.03.18.02
11.1.6Configuring the remote control (S017.6)
• Select service routine S017.6 with security access (see
sections 11.1.3 and 11.1.4).
Following selection, the ID of the currently selected sys
-
tem configuration appears in selection field 1.
1. Select the desired system configuration using the ar
-
row keys of selection field 1, and confirm your selection
by pressing the Service key .
00=Remote control disabled
01=Remote control enabled
After the selection of the system version, the LED
above the
Memory key lights up.
To save the selected system version, first press the Me
-
mory key (the LED above the R key lights up) and
then the R key .
IMPORTANT
The set value is permanently saved as the relevant system
configuration.
• Quit service routine S017. Switch the unit OFF and re
-
start it.
• After the restart, the new system configuration is active.
T R
Prog.
S
kV mA
T R
Prog.
S
kV mA
2.
0 0
1.
➊
➋
➌
2
R