Sirona ORTHOPHOS XG 3 DS, Service Manual

Page: 407 / 578

båÖäáëÜ
59 38 399 D3352
D3352.076.01.13.02
07.2008
5 – 139
Tab 5 5.19 Service routine S034
5.19
S034.5: Display/calibrate center position of ceph scan secondary diaphragm axis
5.19.2 S034: Test step 5
Selecting test step 5 1. Select test step 5 in selection field 2 with the arrow keys and confirm your
selection by pressing the Service key .
After test step 5 is selected, the current offset value for the center position of
the ceph scan
secondary diaphragm axis is displayed in selection field 1.
Switching the test mode on 2. Press the T key to switch the test mode on.
NOTE
i
In the test mode, travel to the center position of the ceph scan secondary dia-
phragm axis is initially performed without offsets. The T key (XG
Plus
) or the
LED above the T key (XG 5) lights up and displays the test mode.
1
2
3
+
- S034
5
n
(
1 2 3
S034_______5____
XG
Plus
:
Easypad touchscreen XG 5: Multipad
+
-
(
n
(
o
(
o
S34
(
n
1
2
3
1500
n
(
1 2 3
____1500________
XG
Plus
:
Easypad touchscreen XG 5: Multipad
(
n
S34
5
R T
T T