manualshive.com logo in svg

Sirona ORTHOPHOS SL 2D, Installation Manual

Share
Download
Sirona ORTHOPHOS SL 2D Installation Manual Download Page 101

64 95 142 D3632

D3632

.

031.01.02

.

02 03.2016

101

Sirona Dental Systems GmbH 

10 Installation: Ceph arm

Installation Manual ORTHOPHOS SL

10.4 Connecting control cables

båÖäáëÜ

10.4.1

Running the cables for the left-hand arm

Running the arm cables

1. Guide the cable on the unit through the groove (A).
2. Lay the cable and the cable loop (L36/L39) as illustrated.
3. NOTICE! Ensure that you do not crush or kink the cables.

Attach the cover (B).

10.4.2

Running the cables for the right-hand arm

Running the arm cables

1. Guide the cable on the unit through the groove (A).
2. Lay the cable and the cable loop (L36/L39) as illustrated.
3. NOTICE! Ensure that you do not crush or kink the cables.

Attach the cover (B).

Summary of Contents for ORTHOPHOS SL 2D





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands