63 76 482 D 3572
58
D 3572
.
031.01.04
.
02 12.2015
9 Appendix
Sirona Dental Systems GmbH
9.2 Conversion instructions for non-"Facescan ready" units
Installation Instructions Facescan
9.2.4
Installing new energy chain 1
Installing the energy chain
1. Route the energy chain up through the stand from its base.
2. Insert new energy chain 1 in the stand.
3. Screw down the mains filter plate.
4. Screw the new energy chain down in the position (marking) of the old
energy chain.
IMPORTANT
Assembly instructions
➢ Pay attention to the energy chain's rolling direction.
IMPORTANT
Possible assembly errors
The one end piece has been removed to make the new energy chain
easier to lay .
The missing end piece is enclosed.
➢ Attach this end piece to the energy chain only when the energy
chain has been laid in the stand.
