Sirona CEREC MC XL Premium Package Operating Instructions Manual Download Page 9

Page: 9 / 78

63 98 536 D 3439

D 3439

201.06.10

02 10.2017

Dentsply Sirona

3 General description

Operating Instructions CEREC MC XL Premium Package

3.2 Intended use

båÖäáëÜ

3.2

Intended use

This unit produces computer-aided dental restorations, e.g. from natural-

appearing ceramic material.
This unit must not be used for any other purpose. If the unit is used for

any purpose other than the one mentioned above, it may be damaged.
Intended use also includes compliance with these Operating Instructions

and the relevant maintenance instructions.

For the USA only

CAUTION: Federal law (USA) restricts sale of this device to or on the

order of a physician, dentist, or licensed practitioner.

CAUTION

Follow the instructions
If the instructions for operating the unit described in this document are

not observed, the intended protection of the user may be impaired.

Summary of Contents for CEREC MC XL Premium Package















































































Search results

Summary of Contents for CEREC MC XL Premium Package

Reviews:

Related manuals for CEREC MC XL Premium Package

Brands by name

Popular brands

Sirona CEREC MC XL Premium Package, Operating Instructions Manual

Search results

Summary of Contents for CEREC MC XL Premium Package

Reviews:

Related manuals for CEREC MC XL Premium Package

Brands by name

Popular brands