W A R N I N G
Thank you for purchasing a Sirius Range Hood.
Please read all the instructions in this manual
before installing the appliance.
Save these instructions for future reference
.
Only use this appliance as an exhaust ventilation system for the removal
of cooking vapors.
DO NOT
use to expel flammable substances or any
other materials or vapors.
The installation procedures in this manual are intended for qualified
installers, service technicians or persons with similar qualified
background.
DO NOT
attempt to install this appliance yourself.
Ensure that electrical power is turned off at source before commencing
installation. All electrical wiring must be properly installed, insulated and
grounded and conform to all applicable codes and standards.
Make sure all existing duct work is clean of grease build up, or duct work
should be replaced, if necessary, to avoid the possibility of a grease fire.
Check all joints on ductwork to ensure proper connection and all joints
should be properly taped. Be careful when cutting through ceilings or
walls not to damage any hidden pipes or electrical wiring. Ensure your
kitchen has sufficient air return vents to replace the exhausted air.
Fan ducts should always be vented to the outside of your home and never
into spaces within walls, ceilings, lofts or attics. Only use rigid, smooth
steel for ducting. The exhaust point of the blower requires a 6” round
connection.
Summary of Contents for SUF1
Page 11: ...8 Staple Invoice Here...
