Registered in England No. 08405712
VAT Registration No. GB163 04 0349
Siretta Ltd
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
sales
fax
email
web
+44(0)118 976 9000
+44(0)118 976 9020
www.siretta.com
26
By selecting ‘Setup’ from the main menu, the following setup changes can be made
(as shown below in
figure 26
). To select a sub menu use the UP/DOWN button until
relevant menu is highlighted, then use the LEFT/RIGHT buttons to amend preference.
Setup Menu
Figure 26
. ‘Setup’ screen
Language:
Language selection of your SNYPER product.
There are 6 language settings: ENG (English), DEU (German),
FRE (French), DAN (Danish), NOR (Norwegian), ITA (Italian).
Default = ENG
Brightness:
SNYPER LCD brightness.
The screen brightness has 6 settings, 0 (lowest) - 5 (highest).
Auto Off:
Automatic power off of the SNYPER.
The auto off has 2 settings, on or off.
Delay:
Time in minutes the SNYPER stays on after last button
press. The delay has 5 settings, 1 minute - 5 minutes.
B-Text:
Colour of body text on the LCD screen.
The SNYPER has 10 body text colour settings.
H-Text:
Colour of highlighted text on the LCD screen.
The SNYPER has 9 highlighted text colour settings.
HTML:
Generate HTML report.
The HTML on has 2 setting, on or off.
Sound
:
Notification sound, this can be set to ON or OFF.
Save Settings:
Saves setup menu changes.
Saves any changes made to the setup menu.
NOTE:
The SNYPER doesn’t automatically save new settings.
