Registered in England No. 08405712
VAT Registration No. GB163 04 0349
Siretta Ltd
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
sales
fax
email
web
+44(0)118 976 9000
+44(0)118 976 9020
www.siretta.com
23
Save Results
With default settings, it is not necessary to save the results as this is automatically
done at the completion of the survey. However, if you have selected the user option to
turn off automatic saving of results, you will need to highlight ‘Save Results’ and press
OK to save results to the SNYPER.
Performing a liveSCAN
(Only available with SNYPER-LTE Spectrum)
liveSCAN works by locking the SNYPER-LTE Spectrum to a selected base station
channel and the cell it is operating on. Once the SNYPER-LTE Spectrum locks to
a channel, a continuous update of the received signal strength of that cell will be
reported.
liveSCAN can be used in two modes:
»
Directional liveSCAN
:
When conducting liveSCAN with a directional antenna,
moving the antenna horizontally will show the direction with the highest signal
strength. A .csv file of each survey taken during the liveSCAN is stored for
analysis if required. A directional antenna covering all frequencies is supplied with
the SNYPER-LTE Spectrum to perform this task
»
Omnidirectional:
When conducting liveSCAN with an omnidirectional antenna,
moving the SNYPER-LTE Spectrum to different areas in a building will show
“hotspots” with the highest signal strength.
Users are encouraged to use their own antennas when performing a survey or
liveSCAN on the SNYPER-LTE Spectrum.
Using the antenna which is intended to be used in the proposed installation will give
the best indication of how the equipment will perform. Placing the antenna in potential
mounting locations and orientations will allow the operator to make an informed
choice about what the best antenna placement is for that installation.
