Registered in England No. 08405712
VAT Registration No. GB163 04 0349
Siretta Ltd
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
sales
email
web
+44(0)118 976 9000
www.siretta.com
6
Local Configuration
The QUARTZ-LITE router supports configuration by local Ethernet port, you can
specify a static IP or DHCP get IP for your computer.
Default IP address: 192.168.1.1
subnet mask: 255.255.255.0
Follow the steps below to configure your router locally:
Step 1.
Click “
Start > Control Panel
”, find the “
Network Connections
” icon and
double click it to enter. Select “
Local Area Connection
” corresponding to the network
card. (See figure 1 below)
Industrial R210 Series Cellular Router User Manual
www.wlink-tech.com
12
3
Router Configuration
This Chapter introduces the parameter configuration of the router, the router can be
configured via web internet explorer, Firefox, or chrome. Here we take GUIs 7 system and
Internet Explorer 9.0 as sample.
3.1
Local Configure
The router supports to be configured by local Ethernet port, you could specify a static IP or
DHCP get IP for your computer. The default IP address is 192.168.1.1
，
subnet mask is
255.255.255.0, please refer to followings:
Step 1
Click
“start > control panel”
,
find “Network Connections” icon and double click it to
enter, select “Local Area Connection” corresponding to the network card on this
page. Refer to the figure below.
Figure 3-3
Network Connection
Step 2
Obtain a IP address automatically or set up IP address,192.168.1.xxx(XXX can be
any number between 2
～
254)
Step 3
Run an
Internet Explorer and visit “
http://192.168.1.1/
”, to enter identi
fy page.
Figure 1.
Network connection
Step 2.
Obtain an IP address automatically or set up IP address as: 192.168.1.xxx
NOTE
- XXX can be any number between 2~254
Step 3.
Open Internet Explorer and visit “
http://192.168.1.1/
”, to enter identify page.
