5.6
Power-up action
After the power is applied, the speed dome performs self-test actions. It starts with lens
actions and then proceeds with pan and tilt movement. After the power-up self-test actions,
system information is displayed on screen for 40 seconds.
The information includes details about the dome model, address, protocol, version and other
information. The Communication item gives the baud, parity, data bit and stop bit settings of
the dome. For example, “2400, N, 8, 1” indicates that the dome is configured with 2400 baud,
no parity, 8 data bits and 1 stop bit.
Get access to the camera
22
