● Screwdriver
To mount the dome with the mini wall mount
1
Make a cable entry hole in the wall to recess the cables.
Otherwise, cables can be threaded through the cable entry hole on the mount.
2
Thread the cables through the mini wall mount and out through either the cable entry
hole in the wall or the hole in the mini wall mount.
3
Fix the wall mount to the wall with proper screws and screw anchors.
4
Attach the waterproof boot to the mini wall mount.
5
Thread the cables through the tube adapter and lock it to the mini wall mount with the
supplied screws and washers.
At this point, the dome can be suspended from the mini wall mount using the safety
wire.
6
Block the mount's cable entry hole.
If the cable is threaded into the wall, block the hole in the mount with the supplied
plate.
If the cable is threaded through the neck of the wall mount, block the cable entry hole
with the supplied sponge(s) to prevent insects from entering the tube.
7
Attach the lock screw plate to the dome plate with the supplied screw, as depicted in the
section Ceiling mounting with a straight tube.
8
Adjust the waterproof boot to the junction of the mini wall mount and the indoor tube
adapter.
9
Connect the cables to the dome camera. Then attach the dome to the indoor tube
adapter and fasten them together with the supplied screw.
Mini wall mount
Mini wall mount with secured cable entry plate
5.3.2
Wall mounting with gooseneck tube
The following figure shows how cables run through the tube.
Install the camera
23