Fastening the indoor tube adapter's lock screw plate to the MSD620
8
Adjust the waterproof boot to the junction of the straight tube and the indoor tube
adapter.
9
Connect the cables to the dome camera. Then attach the dome to the tube adapter and
fasten them together with the supplied screw.
5.3
Wall mount
There are three types of wall mounts for the MSD620 dome camera.
● Mounting with a mini wall mount, as shown in the section Mini wall mount.
● Mounting with a gooseneck tube, as shown in the section Wall mounting with gooseneck
tube.
● Mounting with a wall box, as shown in the section Wall box mounting.
Warning: Fully torque down the mounting bolt that attaches the
WM02 tube adapter to the mounting bracket to prevent any
movement of the camera due to wind, vibration, etc.
Make sure the camera cannot move at all in its bracket after
installation. Any movement of the camera in its bracket can
compromise positional accuracy.
5.3.1
Mini wall mount
Items needed
● Dome camera
● Mini wall mount and other equipped items (optional accessory)
● Screws and screw anchors (not supplied)
● Indoor tube adapter for the MSD620 (optional accessory)
● Waterproof boot (supplied with the indoor tube adapter)
Tools needed
● Drill
Install the camera
22