8.5
Home
PTZ > Home
Users are able to set an operation mode to ensure constant monitoring; if the dome idles for a
period of time, the preset function is activated automatically; this is the HOME function. The
HOME function allows constant and accurate monitoring to avoid the dome stopping or
missing events.
To activate/deactivate the Home function
1
On the PTZ tab, click Home in the menu on the left.
2
Under Home setting, click to open the Switch list, and then select On or Off to activate/
deactivate the HOME function, respectively.
To configure the Home function
1
On the PTZ tab, click Home in the menu on the left.
2
In the Time box, enter the camera idle time (see below); range [1-128] minutes.
3
From the Type and Line lists, select the function and line number to be executed when
camera idle time expires.
4
Click Set.
Time
The time entered in the Time box represents the duration of camera idle time (1-128 minutes)
that you want to elapse before running a Preset point, Sequence line, Autopan path, or Cruise
line. With the Home function activated, the camera starts to count down when it idles, and
then executes the predefined action when the time expires.
PTZ&IMAGE
83