For the location of this block and the alarm pin definition, see Connectors.
To configure the alarm settings
1
Log on to the webpages of the camera.
For instructions on how to do this, see the User Manual.
2
Go to the Application, Motion Detection, and Tampering webpages and configure
the alarms as desired.
4.6
microSD Card
The FD820 supports a microSD card (max. 64 GB) for storing event-triggered and scheduled
recordings. Users can format the SD card and implement automatic recording cleanup through
the Storage page on the web interface of the camera.
To access the microSD card slot
1
Remove the dome cover and inner cover as described in the Installation chapter.
2
Release the camera from its housing.
3
Insert the microSD card into the slot at the side of the Printed Circuit Board (PCB).
Location of microSD card slot
Connectors and cabling
16
