Sinterit SANDBLASTER SLS User Manual | 9
4.3 Safety plate
DO NOT REMOVE THIS LABEL!
Manufacturer:
Sinterit sp. z o.o. ul. Nad Drwiną 10 bud. B3, 30-741 Kraków,
Poland
www.sinterit.com [email protected]
Name:
Sinterit SANDBLASTER SLS
Serial number:
Manufactured:
Made in:
EU, POLAND
Class 2
IP60
Machine type:
ABRASIVE PRESSURE BLAST CABINET 110 [L]
Dimensions:
700 x 550 x 720 [mm]
27.6 x 21.7 x 28.3 [in]
Total weight:
30.5 [kg]
67.1 [lb]
Rated voltage:
230 [V] AC, 50 [Hz]
120 [V] AC, 60 [Hz]
Power consumption:
8 [W]
Ceramic nozzle diameter:
4, 5, 6, 7 [mm]
0.15, 0.19, 0.23, 0.27 [in]
Abrasive material loading capacity:
10 [kg]
22 [lb]
Max. flow rate:
420 [l/min]
Working pressure:
5.0 – 8.6 [bar]
72.5 – 125.0 [psi]
Working area:
675 x 450 x 415 [mm]
26.6 x 17.7 x 16.3 [in]
WARNING! Read and understand operator’s manual and all other safety instructions before using this
machine. Failure to follow operating instructions could result in serious injury.
5. Initial startup of the Sinterit SANDBLASTER SLS after delivery
1. Remove the protective packaging.
2. Gently pull out the contents of the packaging.
3. Remove the bubble wrap and place the machine on a stable surface.
4. Screw the Adjustable mounting feet
K
,
17
onto the sandblaster.
5. Take out accessories from the box.
6. Unlock both door locks
6
and open the door
8
.
Remove from inside:
•
Transport protection
•
Contol pedal’s pneumatic tubings
J
•
Control pedal
K
•
Replaceable PE protective foils
N
•
Accessories box
Check the fitting and tightness of:
•
Protective Rubber Gloves
6
•
Inner Pneumatic tubings
21
,
23
•
Static Nozzle
19
•
Door gasket
11
7. Screw on the Air filter
F
using the
Filter screw
H
. Use the allen wrench
G
included in the accessories box.
H
E
F
8. You can use Sandblaster SLS with or without Sinterit ATEX Vacuum Cleaner.
